solar tracking systems

 

Characteristics
Component grid can be around two axis of rotation of azimuth and elevation with accurately track. They can increase the generating capacity of 25% to 50%, a significant increase in power generation efficiency that adapt to all regions .We use the clamps to reduce the time of installation.
1). Power consumption of the sun automatic tracking device is less than 2 watts (not including the power consumption of the implementing agencies);
2). High tracking accuracy, small average tracking accuracy ≤ 0.2 degrees (recommended speed of the rotating system design in the 0.05 ° / s to 0.2 deg / sec speed range, for large systems, the proposed system, the rotation speed of the design 0.05 ° / s);
3). Tracking control in the time of sunshine automatically.
4). They can applicable to all kinds of weather, automatic identification of weather conditions, control the solar tracking equipment intelligently.
5). Antijamming ability is strong (to eliminate interference of light on the tracking system, such as lightning, flares, etc.); automatic tracking control;
6). One day after tracking, auto back to the initial set position;
7).Tracker performance is stable, the error can be identified, can automatically fix the error data capabilities;
8).With a serial communication interface to support the 485 communications capabilities to the host computer components such as PLC communication network (optional feature);
9). Automatic control tracker running, with a self-learning capability to meet the full requirements of automatic and reliable control.
10). Output over-current protection function, normal drive current 2A, protection current is 4A, 0.3 seconds to activate the over-current protection, and self-locking, excluding external power after the failure to re-start the tracking device can track the status of automatic start
11). With the wind flat feature, they can under the protection of tracking system in wind.
12). Supports a variety of drive mechanism to support the DC brush motor, stepper motor drive support (driver controlled stepper motor driver) to support AC motor drive (drive control contactor or relay)
13).With manual control function, easy sun-tracking system, commissioning, maintenance.
14).Each mount system can install 6-30panels.